Introducing the GEO Reactor. We are pround to be a distributor of the GEO reactor made right here in the US. This reactor has been on the market for a few years and is tried and proven to be a quality unit with excellent performance. Just check out all the features below.
RECIRCULATING DESIGN
Water flows from the bottom of the reaction chamber up through the media. Free CO2 in the chamber is drawn back through the pump. This greatly reduces CO2 consumption and lessens the need for an add on single pass reactor to degass the effluent. Other models collect free co2 at the top and then pass it through the effluent line and into your tank.
LARGE REACTION CHAMBER
Large 6" diameter reaction chamber holds a full eight pound can of carib sea ARM reactor media. The top of the reaction chamber opens to the full diameter of the tube for easy access. COMPACT Only nine inches by nine inches at the base and eighteen in height. The small foot print allows easy placement in your cabinet.
AUTO FILL BUBBLE COUNTER
Easy to view bubble counter is attached to the reactors plumbing and fills automatically at start up, no need to fill manually, ever.
MODIFIED Eheim 1048 Pump
Reliable, quiet Eheim pump included and bolted to the base of the reactor.
ULTRA EASY INSTALL
The easiest install you can have. Just two lines to connect. one line to feed the reactor from your sump, and the co2 line to the bubble counter. No confusing mess of lines to install (and leak)
All cast acrylic construction
Heavy wall six inch diameter reaction chamber. Heavy three eight's thick base, top flange and lid.
Secure glue joints
Top flange is grooved for the reaction chamber tube to seat in before joining. The base is joined over a thick raised disc. This provides a durable, leak free joint and a sturdy product.
Key hole slots
Key hole slots in the lid and eight nylon fasteners. Easy removal for maintenance. Top flange is grooved to hold the O-ring in place for a leak free seal.
Secure pump
Pump is bolted to the base with four nylon fasteners. This adds a great deal of security to the reactor. The pump is not dangling underneath or resting on the floor.
Quality fittings
Quality PVC, hose barb, and JACO fittings used throughout. Rust free nylon hose clamps used on EVERY barb fitting. All tube and fittings required for installation are included
SPECS
Foot print - 9" x 9"
Height - 18"
Chamber capacity - 8 pounds
Circulating pump - EHEIM 1048 NEW IMPROVED PUMP
Feed pump - maxi jet 1200 or M3 Aqualiter (not included with reactor)
Effluent control - Reliable micro ball valve
Aquarium capacity - 300 gallons*
taller/wider reactors built per request *aquarium capacity varies greatly depending on stocking levels and inhabitants housed in the aquarium
Email us! sales@aquariumsupplycompany.com or call us tolll free 1-888-611-1247
