HORIZONTAL METAL HALIDE/POWER COMPACT FLUORESCENT PENDENT:
This pendent uses our parallel reflector to focus the light into the tank as well as supplying sockets and an electronic ballast for 2-28w Power Compacts and up to a 400W metal halide bulb. The metal halide ballast is remote with an 8’ cord. The pendent should be mounted with the bulb parallel to the front of the tank. The power cord comes out the side with eye bolts on the back to hang the fixture. It can also be attached to an existing hood. The pendent is made from powder coated aluminum. A 4" fan is included with a glass lens. The metal halide and fluorescent lamps can be independently controlled.
Dimensions:12.5"W 7.5"H 16"L
This is an unwired pendant. You will need to do some basic wiring. You'll need to wire the pendant cord (3 wires) and plug (3 wires) with wire nuts (not included) Bulb(s) is not included in the pendant.
This ballast will power any metal halide 250-watt bulb. It does not over-drive the bulb, so output will be at the bulb manufacturer's specifications. By using a constantly changing, very high frequency, the ballast will light any bulb without flicker. Longer bulb life and other features makes this the best ballast for all metal halide applications. Does not come with Molex connector.
IceCap uses its unique, patented operating system, which allows you to save energy without compromising light output. By applying lower voltage across the lamp, energy consumption is reduced and lamp life is expected to be increased.
Advantages:
- Energy Savings of over 10% from High Efficiency
- Longer Lamp Life due to constant output
- Longer Ballast life due to low heat
- Compact Size to fit most fixtures
- High Frequency Operation is flicker & noise free
- Savings on air conditioning costs
Quality:
- Built-in circuit protection
- High Voltage, High Current Protection
- High Temperature Shut-Down
- Improper Wiring Protection
- Automatic Bulb Failure Shut-Down
- Automatic Resetting
- Starts in Cold Temperature
- Starts in Low Voltage Environments
- Allows up to 30 feet between Lamp and Ballast
Specifications:
| Description |
MH-250HQI |
|
Lamp
|
MH-250W
|
|
Lamp Spec: Voltage
|
130V
|
|
Lamp Spec: Current
|
2.1 Amps
|
|
Input Voltage
|
120V A/C
|
|
Input Current
|
2.35A Max.
|
|
Power Factor
|
>92%
|
|
Lamp Current Crest Factor
|
<1.8
|
|
Operating Frequency
|
70 - 90KHz
|
|
Ignition Voltage
|
1.6KVp
|
|
Starting Time
|
<3 minutes
|
|
Restarting Time
|
5-6 minutes
|
|
Minimum Starting Temp
|
-4F or -20C
|
|
Max Allowed Area Temp
|
<122F or <50C
|
|
Max Mounting Distance
|
33 feet
|
|
Flicker
|
none
|
|
Sound Rating
|
A
|
|
Enclosure Overall Dimensions - inches
|
8.4 x 3.7 x 2
|
|
Enclosure Overall Dimensions - metric
|
214 x 94 x 52
|
| Weight |
3 lbs / 1.4Kg |
