The Direct Connect 4 modules features 4 relay controlled outlets each capable of switching 120V at 8 Amps. The DC4HD enables a very reliable hardwired connection between the AquaController and all controlled devices - X10 interference problems caused by noisey electronic ballasts (i.e. Blueline) are eliminated. NOTE: This module is suitable for use on ICECAPª ballasts; it utilizes large relays which can withstand the high inrush currents on these ballasts.
4 120V Outlets (Max 12 Amps, total current must be less than 15 Amps).
High reliability direct wired connection to the AquaController.
Can be used with electronic ballasts which cause X10 interference.
Up to 5 DC4s can be daisy chained for up to 20 switched outlets.
X10 Control Interface can be last device in chain (Simultaneous X10 and hardwired control)
